MegaGen provides all products by R&D with safe and accuracy

R2GATE™ Full Surgical KIT for AnyRidge / AnyOne 

R2GATE full surgical kit is composed with all of drills and components that

are needed for the Digital Guided Surgery which uses R2GATE Guide™ after

R2GATE™ diagnosis. It helps to actualize minimally invasive surgery and

makes exact clinical result as the diagnosis.


1. R2GATE™ Full Surgical KIT 

[Kit Components]

   - Initial Drill

• Use the initial drill in order to mark the drilling position on the bone.

  Start drilling slowly, when drill guide part is fully contacted with drilling

  core of R2GATE Guide™.

• Recommended drilling speed range is 300 ~ 800 RPM with copious



   - Second Drill

• This unique step-drill(from Ø2.0 to Ø4.6) is used to flare out the upper

   cortical bone of the osseotomy.
• It helps not only the rest drilling procedure but abut- ment connection.

  In case of hard bone, if the 2nd drilling will be disturbed by thick cortical

  bone. Stop the drilling and try it after final drilling procedure.


   - Stopper Drill

• Universal drills consist of Ø2.0, Ø.2.5, Ø2.8 diameter to enlarge the

  osteotomy gradually.
• The length of drill are designed as 7.0, 8.5, 10, 11.5, 13mm for most

  common length of implant system.
• Recommended drilling speed range is 500 ~ 800 RPM with copious



   - Bone Profiler

• Recommended drilling speed is 300 ~ 800 RPM.


   - Stopper Drill [AR]

• Recommended drilling speed is 300 ~ 800 RPM.

   - Stopper Drill [AO]

• Recommended drilling speed is 300 ~ 800 RPM.


   - Cortical Bone Drill [AR]

• Recommended drilling speed : 300 ~ 800 RPM

   - Cortical Bone Drill [AO]

• Recommended drilling speed : 300 ~ 800 RPM


   - Implant Carrier[AR]

• The purpose of tab drills in the universal kit system is insertion test.

  some of implant are required this procedure before final fixture

  insertion. choose the one-step under size of tab to protect from

  enlargement of osteotomy.
• Recommended insertion torque and speed is 45 ~ 50Ncm, under 40 RPM.

   - Implant Carrier[AO]

• Two different implant carriers for regular stent since Ø3.5 fixture has

 different abut- ment connection.
• To pick up the fixture from the ampule and insert it to the ossetomy.

  Then turn it to clock-wise direction 2~3 times manualy.
• When it gets fixation from the osteotomy, connect the handpiece adaptor

 and use implant motor.
• Recommended insertion torque is 45~50Ncm.


   - Carrier-Handpiece Adapter

• Useful to use the handpiece for the implant placement following initial

 delivery of a fixture with a fixture carrier.


   - Carrier Extension

• To extend the length of implant carrier.


   - Drill Extension

• No more than 35Ncm torque : May distorted when excessive force is applied.
• Extends drills & other handpiece instruments.


   - Hand Driver (1.2 Hex)

• Used for all Cover Screws, Abutment Screws, and Healing Abutments.
• Available in 4 lengths for added convenience.
• Hand Driver can be directly inserted into the Torque Wrench without

  using an adaptor.
• Hex tip can with stand 35-45Ncm of torque without distorting.


   - Ratchet Wrench

• Used to exert more force than the Handpiece.
• No bearing system : No breakage and no corrosion problems.
• Arrow laser marking indicates direction of force.



   * System Options for the AnyOne External

- Cortical Bone Drill

- Tap Drill

- Implant Carrier

R2Gate Surgical Full Kit



    MegaGen Australia

    Dental Implants


    Unit 1, 233 Greenhill Rd. Dulwich. SA 5065


    T: 08 8331 2257